重工機械廠采購貝奇爾自動潤滑泵 潤滑系統 查看采購商

臨時采購 | 2023-02-01

采購信息內容

重工機械廠采購貝奇爾自動潤滑泵 潤滑系統，需要選型報價，指定首次加注的潤滑劑，并提供一份同等潤滑劑的清單。               

潤滑油站配套用油泵及液壓元器件選用德國力士樂或同等檔次進口產品；潤滑系統自動潤滑泵及元器件選用南京貝奇爾或同等檔次產品。

7.11 Lubrication 潤滑 All application points for lubricants shall be readily accessible 潤滑劑的所有加油點應易于接近。 

Where lubrication and seal purging points are not readily accessible or would require the removal of guarding for access, the grease nipples shall be installed on a rigidly mounted bulkhead in a position which is readily accessible and does not require the removal of safety guards 當潤滑點和密封清掃點不易接近或需要拆除防護裝置才能進入時，潤滑脂嘴應安裝在牢固安裝的隔板上，位置應便于接近，且不需要拆除安全防護裝置。 

Remote lubrication lines should be of a reinforced hydraulic hose type. 遠程潤滑管路應采用加強型液壓軟管。 

Lubricant wells and reservoirs shall have adequate fill and drain openings and means for readily determining the level of lubricant. After shop test run-in period, gear-cases and reservoirs shall be drained, inlet and outlet plugged, and tagged to indicate that the equipment must be filled at commissioning. 潤滑油桶和儲油庫應有足夠的加注和排放口，并有辦法隨時確定潤滑油的含量。在車間試運行期結束后，齒輪箱和儲油罐應排空，堵住進油口和排油口，并貼上標簽，表明設備在試運行時必須加注潤滑油。 

Grease canisters may be used in critical applications where daily application is required. 潤滑脂桶可用于需要日常使用的關鍵應用場合。

 Grease lubricated bearings shall be packed with lubricant. Grease lubricated bearings shall be fitted with Taconite seals with grease purged, triple labyrinth seals with an ‘A’ series V-ring seal fitted onto the shaft. 潤滑脂潤滑的軸承應填充潤滑劑。潤滑脂潤滑軸承應安裝骨架密封，并清除潤滑脂，三重迷宮密封，軸上安裝“A”系列V形密封圈。 

Oil lubricated bearings shall be fitted with Taconite seals with grease purged, triple labyrinth seals with a backup double lip seal to ensure that grease does not penetrate into the housing 油潤滑軸承應安裝帶油脂凈化的骨架密封，三層迷宮式密封，并帶有后備雙唇密封，以確保油脂不滲入軸承座。 

Replaceable sleeves shall be provided to prevent lip seals from rubbing directly on shafting. 應提供可更換的套筒，以防止唇形密封件直接在軸上摩擦。 

Gearing and gearboxes shall be fitted with grease purged triple labyrinth Taconite type seals. Lubrication intervals shall be maximised. The Supplier shall nominate first fill lubricants and provide a list of equivalent lubricants. 齒輪箱和齒輪箱應安裝經過油脂清洗的三重迷宮式骨架型密封。